Making ModelSim ALTERA STARTER EDITION vsim 10.1d work on Ubuntu 14.04

[WARNING: Some people are reporting that following the steps for them does not fix the problem. I am working on trying to find out what the issue is.]

Trying to get a version of ModelSim running on a very modern version of Linux often presents challenges. Luckily I had lots of helpful information on the internet (major sources linked below) to get it going. This article mostly adapts the work done by the Arch Linux crew.

Problem number one: The free version of ModelSim Altera Edition is 32 bit only while the normal Linux PC will be 64 bit.

On Linux this requires us to install the 32 bit versions of the libraries that it depends on. Luckily this is fully supported on a modern Linux like Ubuntu 14.

sudo dpkg --add-architecture i386
sudo apt-get update

sudo apt-get install build-essential

sudo apt-get install gcc-multilib g++-multilib \
lib32z1 lib32stdc++6 lib32gcc1 \
expat:i386 fontconfig:i386 libfreetype6:i386 libexpat1:i386 libc6:i386 libgtk-3-0:i386 \
libcanberra0:i386 libpng12-0:i386 libice6:i386 libsm6:i386 libncurses5:i386 zlib1g:i386 \
libx11-6:i386 libxau6:i386 libxdmcp6:i386 libxext6:i386 libxft2:i386 libxrender1:i386 \
libxt6:i386 libxtst6:i386

Problem number two: If you have the following error when running vsim:

** Fatal: Read failure in vlm process (0,0)
Segmentation fault (core dumped)

Then you probably need to build a new version of freetype, a font setting library and modify ModelSim to use it. For an unknown reason ModelSim has an issue with modern versions shipping in Arch and Ubuntu 14.04. First download the source code of freetype 2.4.12:

http://download.savannah.gnu.org/releases/freetype/freetype-2.4.12.tar.bz2

Now install the build dependencies needed for libfreetype6, extract the source (using tar) and configure and build libfreetype:

sudo apt-get build-dep -a i386 libfreetype6

tar -xjvf freetype-2.4.12.tar.bz2
cd freetype-2.4.12
./configure --build=i686-pc-linux-gnu "CFLAGS=-m32" "CXXFLAGS=-m32" "LDFLAGS=-m32"
make -j8

The finished libraries are now available inside the "objs/.libs" directory. As they are necessary to run ModelSim we need to copy them into the install directory so they don't get lost and then modify ModelSim's vsim script to use the new libraries instead of the system wide versions. Change directory to the directory where you installed ModelSim, /opt/altera/13.1/modelsim_ase/, on my system. Note you may need to edit the directory paths to match those used on your system.

sudo mkdir lib32
sudo cp ~/Downloads/freetype-2.4.12/objs/.libs/libfreetype.so* ./lib32

Now we need to edit the vsim launch script to ensure the new freetype libraries are used:

sudo vim bin/vsim

Search for the following line:

dir=`dirname $arg0`

and underneath add the following new line:

export LD_LIBRARY_PATH=${dir}/lib32

Test by running vsim and hopefully you will be greeted by the ModelSim GUI.

[Tested on fresh install of Ubuntu 14.04]

Sources:

1. https://wiki.archlinux.org/index.php/Altera_Design_Software
   
2. http://stackoverflow.com/questions/3261909/build-32bit-on-64-bit-linux-using-a-configure-script 
3. https://wiki.debian.org/Multiarch/CrossDependencies

Success targetting coreAssembler on FPGA

Just instantiated an AMBA bus structure into a cyclone III FPGA from Altera. Toolchain was a bit of a pain but most of that now sorted out. Now in a position to make arbitrary bus and peripheral structures. Just need cores now. And some form of memory.

coreAssembler -> Designware Compiler -> Quartus II

What a productive night.

Designware Compiler being difficult...

Trying to use Designware compiler to build for altera FPGAs.

Quartus II supplies the needed db files, however it doesn't seem to be consistent! I can't make any small designs, but I have successfully built a large AMBA structure for a cyclone II. Trouble is the libraries are rated as compatible with designware compiler 2004, not 2007.

The compiler dies with an internal error and a stack-dump. Will try driving design compiler by hand first to get more design information.