This is the second article in the series (click here for the series index) describing the IBM PowerPC™ 405 synthesizable core and peripherals and will cover what needs to be done to take the IP and get the RTL simulating with the modern versions of the necessary Synopsys Tools and a simulator of your choice.
Initial Unpacking
When you first unpack the DesignWare PowerPC405-S™ implementation view coreKit (the archive is called DW_ppc405-FS_iv_1.0a_AV.tar.gz) it expands to a directory DW_ppc405-FS_iv_1.0a_AV.
The first thing you should do is begin reading the excellently written User Guide (docs/405_ivug.pdf) which provides the suggested flows along with the Release Note (docs/iv_rn.pdf) that specifies the tools and environment with which you need to build the processor.
However the software versions requested by the release note to simulate the RTL is problematic. I have listed below the required software in black, the lowest version available in red and the highest version available at time of writing in blue:
Required:
- Synopsys coreConsultant, Version V-2004.03-CT4.4.2 Z-2007.06-SP5 C-2009.06-3
- Synopsys Vera System Verifier, Version 6.3.0 Z-2006.12 A-2007.12-12
- Synopsys Design Compiler, Version U-2004.06-SP2 Z-2007.03-SP2 C-2009.06-SP2
- Synopsys VCS, Version 7.1 Y-2006.06-SP1 C-2009.06-1
- Mentor Graphics ModelSim, Version 5.7g 6.5c
- Cadence NC-Verilog, Version 5.1 8.1
[Note: at the time of publication the current commercial coreKit is version 3, not the version 1.0a discussed here and supports the current generation of tools.]
In the following sections I will describe how to get the PowerPC 405 verified with the following tool set:
- coreTools C-2009.06
- DC Ultra B-2008.09
- DesignWare 2009.06a
- vera A-2007.12
- NC-Verilog (Integrated Unified Simulator) 8.1
Getting Started
You should now have a directory tree in this root beginning with the name of the workspace. It is similar to the unpacked .tar.gz and populated with symlinks to some of the original files.
Choose the built in Artisan 130LVFSG RAM models and proceed to the simulation stage (I will discuss integrating custom SRAMs in a later article).
Verification by Simulation: Initial Experiences
When you have successfully moved onto the "Verify Component" stage things are not so simple. As we are going to use NC Verilog be sure to choose NC_Verilog as the simulator and ensure the relevant paths are set correctly. Leave the rest of the options at their default values.
[Note: All the issues listed here (and some more of the same) are solved with one comprehensive script and a few instructions in the section below. This section is here to detail what kind of issues you may face and how to solve them to allow you to debug your own installations should this be necessary.]
Building the Vera Objects
The design of the simulation/test environment uses Vera testbench tool to provide compiled simulation objects that surround the Verilog core and a few other Verilog modules and test vectors. We need to compile these Vera objects and we do that by opening a terminal in the Workspace directory we have created (RTLVerification). Then execute this series of commands in the terminal:
cd sim/vera/src
./build_vro
The script will generate several screens full of output with no errors (a few warnings do appear). You can check the content of the sim/vera/lib directory and see the compiled .vro objects.
Running the Simulation
When you hit "simulate" you are faced with the following error message:
For some reason several script files are not correctly linked into the RTLVerification/sim/ directory, but it is easy to fix.
Open the terminal and navigate into the sim/ directory:
cd sim/
ln -s ../../DW_ppc405-FS_iv_1.0a_AV/sim/build_pli_* ./
[Note that you must have the directories setup as discussed or change the command to where the you unpacked the original coreKit directory]
Unfortunately we are not quite out of the woods yet, as the build_pli_nc.sh has to be run by hand to build the binary link between Vera and NC_Verilog. If your environment variables are set correctly then this will complete without error leaving behind the binary file libpli.so.
[Note that you need to have a 64 bit version of Vera for a 64 bit simulator and 32 bit for 32 bit. If you are building for a 32 bit simulator and 32 bit Vera on 64 bit linux edit the pli script to add an -m32 immediately after "gcc" in the compile line and "gcc" in the link line, e.g.:
elif [ `uname` = "Linux" ]; then
gcc -m32 -fPIC -c -I$VERA_HOME/lib/vlog -I$CDS_INST_DIR/tools/verilog/include $VERA_HOME/lib/vlog/veriuser.c
gcc -m32 -shared -o libpli.so veriuser.o $VERA_HOME/lib/vlog/libSysSciTaskpic.a
] Retrying the simulation in the coreConsultant GUI produces the following result almost instantly:
Now I think NC Verilog is an excellent simulator however simulating an entire core in a few seconds? No.
Delving into the scripts reveals another missing file: sim/runtest. By using the same procedure as before we can link it in:
cd sim/
ln -s ../../DW_ppc405-FS_iv_1.0a_AV/sim/runtest ./
Unfortunately this script is also not in a working condition: It depends on the perl distributed by Synopsys but it is hardcoded to try one only available within IBM. However fortunately Synopsys ships this perl with coreTools. Open the file sim/runtest in your favorite text editor and change the first few lines from:
#!/afs/raleigh/cadtools/synopsys/dc/2005.09/linux/bin/snpsperl
require 5.004;
BEGIN { @INC = ( "/afs/raleigh/cadtools/synopsys/dc/2005.09/linux/lib" ); }
to:
#!$YOUR_PATH_TO_CORETOOLS/linux/dware/bin/snpsperl
require 5.004;
BEGIN { @INC = ( "/afs/raleigh/cadtools/synopsys/dc/2005.09/linux/lib" ); }
to:
#!$YOUR_PATH_TO_CORETOOLS/linux/dware/bin/snpsperl
require 5.004;
BEGIN { @INC = ( "$YOUR_PATH_TO_CORETOOLS/linux/dware/lib" ); }
replacing "$YOUR_PATH_TO_CORETOOLS" with the absolute path in your installation.
Trying to simulate again produces the "instant success" we will come to know and love.
Another missing file that needs to be linked into our workspace is the Makefile used to run these simulations:
Unfortunately this Makefile has a similar problem with hardcoded paths that need correcting, as does Report.pl, runTB and hexFormal.pl. There are also numerous files that are not linked in. These issues arise from the coreKit being delivered in an installed from compressed into an archive rather than as a .coreKit file. To save you the effort of solving every one of these issues have a look at the next section. :
Trying to simulate again produces the "instant success" we will come to know and love.
Another missing file that needs to be linked into our workspace is the Makefile used to run these simulations:
cd sim/
ln -s ../../DW_ppc405-FS_iv_1.0a_AV/sim/Makefile ./
Unfortunately this Makefile has a similar problem with hardcoded paths that need correcting, as does Report.pl, runTB and hexFormal.pl. There are also numerous files that are not linked in. These issues arise from the coreKit being delivered in an installed from compressed into an archive rather than as a .coreKit file. To save you the effort of solving every one of these issues have a look at the next section. :
Verification by Simulation: Solved
[Ensure you have followed the instructions in "Getting Started" above. You should have installed a new workspace and have completed "Specify Configuration" and moved onto "Verify the Component"]
1) Open your favorite text editor and paste in the following script:
#!/bin/bash
#
# fix_sim_dir.sh
#
#Copyright Matthew Swabey (matthew@swabey.org).
#
#You are licensed to use this file in conjunction with the IBM PowerPC 405 coreKit and to make modifications as needed to this script as long as this copyright notice is kept.
#This script should be executed from the the new workspace directory after you have installed it with coreConsultant and progressed past specifying the SRAM technology.
UNPACKED_COREKIT_DIR=/export/fastcad/disktmp/mas/IBM_PUB2/DW_ppc405-FS_iv_1.0a_AV
SNPS_PERL_EXE=/home/esdcad/software/synopsys/linux/coreTools_B-2008.12-SP1/linux/dware/bin/snpsperl
SNPS_PERL_LIB=/home/esdcad/software/synopsys/linux/coreTools_B-2008.12-SP1/linux/dware/lib
#Build the vera objects with the version of vera installed
cd ./sim/vera/src
./build_vro
cd ../../..
#Link in the files needed to build the simulation of the PPC and run the testbenches
ln -s $UNPACKED_COREKIT_DIR/sim/build_pli_* ./sim/
ln -s $UNPACKED_COREKIT_DIR/sim/Makefile ./sim/
ln -s $UNPACKED_COREKIT_DIR/sim/runtest ./sim/
ln -s $UNPACKED_COREKIT_DIR/sim/Report.pl ./sim/
ln -s $UNPACKED_COREKIT_DIR/sim/scripts/hexFormat.pl ./sim/scripts/
ln -s $UNPACKED_COREKIT_DIR/sim/scripts/run405.config ./sim/scripts/
ln -s $UNPACKED_COREKIT_DIR/sim/scripts/runTB ./sim/scripts/
mkdir ./sim/testsuite
ln -s $UNPACKED_COREKIT_DIR/sim/testsuite/* ./sim/testsuite/
ln -s $UNPACKED_COREKIT_DIR/sim/testbench/*.v ./sim/testbench/
ln -s $UNPACKED_COREKIT_DIR/sim/testbench/*.inc ./sim/testbench/
ln -s $UNPACKED_COREKIT_DIR/src/rtl/*.v ./src/rtl/
#script files needing corrected perl paths separated by a space.
TO_BE_FIXED='./sim/Makefile /sim/runtest ./sim/scripts/hexFormat.pl ./sim/scripts/runTB ./sim/Report.pl'
function fix_perl_paths {
#Fix the afs paths for snpsperl
sed -i "s:/afs/raleigh/cadtools/synopsys/dc/2005.09/linux/bin/snpsperl:${SNPS_PERL_EXE}:g" $1
sed -i "s:/afs/raleigh/cadtools/synopsys/dc/2005.09/linux/lib:${SNPS_PERL_LIB}:g" $1
#Fix added for runTB
sed -i "s:/global/freeware/SunOS/5.8/perl-5.6.1/bin/perl:${SNPS_PERL_EXE}:g" $1
}
for file in $TO_BE_FIXED; do fix_perl_paths "$UNPACKED_COREKIT_DIR/$file"; done
#End of script
2) Edit the top three variables, UNPACKED_COREKIT_DIR, SNPS_PERL_EXE & SNPS_PERL_LIB to have the absolute paths to the appropriate executable or directory. There should be no spaces in the paths.
3) Save this file with a suitable name (e.g. fix_sim_dir.sh) in the new workspace you have created. Make the script executable using the command chmod u+x "filename". When you run it you should see an output that looks like this (but with many more Vera banners):
++---------------------------------------------------------------------++ || VERA System Verifier (TM) || || Version: A-2007.12 () -- Thu Oct 8 11:35:39 2009 || || Copyright (c) 1995-2004 by Synopsys, Inc. || || All Rights Reserved || || || || For support, send email to vera-support@synopsys.com || || || || This software and the associated documentation are confidential || || and proprietary to Synopsys Inc. Your use or disclosure of this || || software is subject to the terms and conditions of a written || || license agreement between you, or your company, and Synopsys, Inc. || ++---------------------------------------------------------------------++ Warning: async drive on skewed signal jtag_o.tdi, at 78 in ./p405s_jtag.vr Warning: async drive on skewed signal jtag_o.tms, at 79 in ./p405s_jtag.vr Compilation errors: 0 ++---------------------------------------------------------------------++ || VERA System Verifier (TM) || || Version: A-2007.12 () -- Thu Oct 8 11:35:39 2009 || || Copyright (c) 1995-2004 by Synopsys, Inc. || || All Rights Reserved || || || || For support, send email to vera-support@synopsys.com || || || || This software and the associated documentation are confidential || || and proprietary to Synopsys Inc. Your use or disclosure of this || || software is subject to the terms and conditions of a written || || license agreement between you, or your company, and Synopsys, Inc. || ++---------------------------------------------------------------------++ Compilation errors: 0 ++---------------------------------------------------------------------++ || VERA System Verifier (TM) || || Version: A-2007.12 () -- Thu Oct 8 11:35:39 2009 || || Copyright (c) 1995-2004 by Synopsys, Inc. || || All Rights Reserved || || || || For support, send email to vera-support@synopsys.com || || || || This software and the associated documentation are confidential || || and proprietary to Synopsys Inc. Your use or disclosure of this || || software is subject to the terms and conditions of a written || || license agreement between you, or your company, and Synopsys, Inc. || ++---------------------------------------------------------------------++ Compilation errors: 0 ln: `./sim/testbench//p405s_rambist_tb.v': File exists ln: `./sim/testbench//tb_p405s_dataram_64X34_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sram256x46_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sram256x48_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sram512x128_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sram512x32_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sram512x8_wrapper.v': File exists ln: `./sim/testbench//tb_p405s_sramBytWr512x128_wrapper.v': File exists ln: `./src/rtl//PPC405F5V1_soft.v': File exists
At this point the script will have built the vro objects using Vera, linked in all the missing files and corrected the paths in the scripts for you.
4) Enter the ./sim directory in the workspace and run the build_pli_nc.sh script by hand to build the binary link between Vera and NC_Verilog. If the environment variables are set correctly then this will complete without problem leaving behind the binary file libpli.so
[Note that you need to have a 64 bit version of Vera for a 64 bit simulator and 32 bit for 32 bit. If you are building for a 32 bit simulator and Vera on a 64 bit computer edit the scripts to add an -m32 immediately after "gcc" in the compile line and "gcc" in the link line:
elif [ `uname` = "Linux" ]; then
gcc -m32 -fPIC -c -I$VERA_HOME/lib/vlog -I$CDS_INST_DIR/tools/verilog/include $VERA_HOME/lib/vlog/veriuser.c
gcc -m32 -shared -o libpli.so veriuser.o $VERA_HOME/lib/vlog/libSysSciTaskpic.a
]5) Return to the coreConsultant GUI, check you have selected the correct test suite, simulator and other variables and click "Apply" to be rewarded with:
This will take quite a while, so enjoy a well earned cup of tea/coffee/other until it completes:
7) ...
8) Profit!
Published with permission from IBM and Synopsys
No comments:
Post a Comment